„Substrate Technology“ į pagalbą klientams ir gamintojo rengiamus mokymus žiūri labai rimtai. Šiame tinklalapyje rasite įvairių mokymo seminarų ir darbo vietų nuotraukų, darytų ten, kur lankėmės, kad savo klientams ir prekybos agentams padėtume sukurti daugumą mūsų produktų. Jau 10 metų kaip teikiame šią paslaugą, tačiau šios savo įmonės veiklos griežtai nedokumentuodavome.
Ketiname dokumentuoti kiekvieną savo apsilankymą ir pateikti čia. Jeigu esate dabartinis klientas, užmeskite čia akį; kai kas jus gali maloniai nustebinti.
Naujųjų „Prep/Master“ mašinų paroda prekybos agentams
STI 2006 m. gegužę išleido savo naująją „Prep/Master“ mašinų seriją. Pristatyme dalyvavo įvairūs mūsų prekybos agentai iš Jungtinių Valstijų, Kanados ir Vokietijos. Norėjome, kad mūsų prekybos agentams naujoji mašina būtų pristatyta tiesiogiai, kad jie galėtų susipažinti su pakeitimais, kuriuos atlikome, o taip pat suprastų, kaip tie pakeitimai pagerina jos veikimą. Norėdami pamatyti atnaujintas mašinas šiuo saitu pateksite į tinklalapį, skirtą naujajai „Prep/Master“ mašinai.
Prekybos agentų mokymas Klaipėdoje, Lietuva
On January 10th, STI had the privilege to demonstrate concrete polishing using the Prep/Master 3030 diamond grinder in Klaipeda, Lithuania. On hand were attendees from Lithuania, Estonia, Latvia and Russia. The seminar was a huge success and the concrete looked terrific; even if the language difference and being jet-lagged made it difficult to tell if we had everyone's attention. We also had the opportunity to apply a stencil to the dealer's shop floor (pictured) which means 'Polished Concrete-What Could Be Better?' On hand from STI were Josh and Holly Jones and from L&M Construction Chemicals, Deke Rife.
Dealer Training in Shanghai, China
On December 4th, STI traveled to Asia to provide concrete polishing samples on a large parking structure in Shanghai. Our Chinese dealer's were very happy with the sample and saw the same potential for polished concrete as we have here in the states. As pictured, we had to improvise with the un-loading of the Prep/Master 3030 but it eventually made it to the ground; the wheelbarrow however had to be retired. On hand from STI were Bill Jones and Eric Gallup and from L&M Construction Chemicals, Deke Rife.
Customer Training in Morris, Illinois
On November 30th we held a customer training seminar for 30 contractor's from various parts of the United States as well as Puerto Rico and Canada. The seminar lasted two days and was a great success, despite the snow storm, power outage and floor scrubber feats of strength (click on the video link from YouTube). We usually hold this type of seminar 3-4 times per year or more often if required. Since our customer's never really know when they are going to be available, we do not schedule these seminar's more than a month and a half in advance. We do however hold 10-15 individual training sessions at the request of our customer's.
St. Louis Job Site
On January 17th, Dave Wood visited a contractor in the Midwest to provide assistance for a large polish and stain job. The project size was approx. 30,000SF and consisted of the following:
First cut using a 3030 Prep/Master using the 3" 100 grit Terrazzo Pad.
]Subsequent cuts 200 through 3000 grit.
Dye application.
FGS Permashine application (2 coats)
Henry Ford Center MI
On January 11th, Dave Wood visited the jobsite of Advanced Terrazzo and Marble at the Henry Ford Center Museum. At this job, the contractor used the STI-3030 Prep/Master, the STI Swing Machine, STI E-Z Polish and STI E-Z Seal. This was an old terrazzo floor that required a 'spiff-up',and as you can see, the contractor had great success in bringing this dingy floor back to a thing of beauty. Also, because of the use of the STI E-Z Seal, this floor is protected from stains and water infiltration.
Guynn Enterprises Casper, Wyoming
On September 15th Eric Gallup visited our new customer Freddie Guynn at his job in Casper, Wyoming. This was a 20,000 square foot multi-purpose facility that was to be polished and dyed. Our customer used his new 3030 Prep/Master in the snow and sleet to do the first cut before the walls or roof went on. He saved his customer a $1.00 per square foot by doing the first cut this early (NO EDGES), even if he was a little frostbitten.
World Of Concrete 2007
The World of Concrete '07 was a huge success for our company. The weather was perfect, customer traffic was plentiful and the polished concrete demonstration turned out flawless (even though the slab was frozen five days before). Our booth consisted of our Prep/Master line of equipment, IMPACTS shotblast machines from Germany and Epoxy and Glass demonstrations by Terrazzo & Marble Supply Companies.
If you requested information, keep an eye out for a notification by email or if you require information sooner, give us a call; we'd be happy to talk with you.
Substrate Technology, Inc. •Telefonas: (815) 941-4800 • Faksas: (815) 941-4600 • El. paštas: info@substratetechnology.com
S.T.I. 2005, all rights reserved. Reproduction or use without expressed written consent is forbidden.
Violators will be prosecuted to the fullest extent of the law
