STI Videos


Concrete Prep
  1. How to Use the #00 Prep Tool
  2. Understanding the Difference between the #0 & #00 Prep Tools
Concrete Polishing
  1. Importance of using the Metal Velcro Adapter and Resin Adapter Together
  2. The CASH Pad System
  3. The CASH Dots System
  4. The SPIN-1 Pad System
  5. The PM200 Machine (for Edging)
  1. STI Grout Pan Process on Terrazzo using the TPS Diamond System
  1. Marble Restoration


Operation and Maintenance

Safe Operation - Electrical
  1. Describing the "Safety Off Position" on the P/M Machine
  2. Adjusting the Variable Speed Drive and How to Determine Safe Speeds
  3. What is the STI Dust Collection System?
  4. How to use the Dead Man Key Operation
Safe Operation - Propane
  1. Proper Starting of the P/M Propane Machine
  2. Proper Maintenance of the P/M Propane Machine
  3. Maintenance Procedure for Propane-powered Machines
General Procedures
  1. At What Level do I Fill the STI Gearbox Oil?
  2. How to Disassemble and Reassemble the Eco/Prep II
  3. Removing the Tool Plate & Coupler Assembly from the P/M Machine
  4. Attaching the Tool Plate & Coupler Assembly to the P/M Machine
  5. Proper Use of the EG Adapter (Which side of the adapter do you attach to the tool plate?)
  6. Leveling the STI-2807 Grinding Head
  7. STI Edge Plates Demonstration
  8. Removal of Slurry using Slurry Slayerâ„¢
  9. Adapting an Electrical Plug to a Single Phase
  10. How to Perform an S-Curve Motion on the P/M Machine

Repairs and Troubleshooting

  1. Changing the Seals on the P/M Machine
  2. How to Replace the Shaft in the STI Gearbox
  3. Replacing the EG Adapter on the STI Tool Plate
  4. Repair Kits and Maintenance Kits
  5. Programming a Repaired or Inoperable MC1000 Drive
  6. Programming the SMV Drive
  1. Troubleshooting the Electrical System
  2. VSD Fan Failure (How to determine when the fan has failed)
  3. Assessing When a Coupler is Functional or Non-Functional